Kingspan Kooltherm K108 Cavity Insulation Board 75x450x1200mm 3.24m² (6 Sheets)

Kooltherm K108 is an advanced partial fill cavity wall insulation solution. It has a thermal conductivity of 0.019W/mK and can achieve the same wall U-value as alternative products with a much thinner profile. Its low thermal conductivity can maximise usable internal floor space.

Features:

• One of the thinnest commonly used insulation for partial fill cavity walls.
• Kooltherm K108 is a premium performance, lower-lambda rigid thermoset phenolic insulation.
• Thinner walls can allow more natural daylight into your building.
• Kooltherm K108 is faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture.
• Clear cavity is maintained - resists moisture penetration.
• The compressive strength of Kooltherm K108 typically exceeds 100 kPa.
• Low emissivity foil facings significantly increase the thermal resistance of the cavity.
• Lightweight insulation that is easy to transport, handle and install.
• Part of our Kooltherm range of advanced insulation.

Technical data:

• Brand - Kingspan
• Range - Kooltherm K108
• Product Type - Cavity Insulation Board
• Thickness - 75mm
• Width - 450mm
• Length - 1200mm
• Approx. Coverage - 3.24m²

Standards & Certifications:

• Certified to BES 6001 (Framework Standard for the Responsible Sourcing of Construction Products) ‘Very Good’
• Under System 4 AVCP, Kooltherm K108 has a Euroclass rating of F