Flexible Braided Tap Connector To Speedfit With Isolating Valve ¾" x 22x300mm

Features:

• Push-fit flexi braided hose for the connection of plastic and copper pipe to a male thread appliance.
• Connectors use a grip then seal collet arrangement.
• The isolating valve has been designed to allow temporary servicing of downstream equipment and must only be used in the fully open or fully closed position.
• Ideal for the connection of taps.
• Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance.
• Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
• The fitting ensures an easier working environment in confined places and removes the need for hot works on site.
• With all plastic pipes the relevant manufacturer’s pipe insert is required.
• Can be used with copper pipe to BS EN 1057 & Speedfit Barrier Pipe to BS7291.

Technical data:

• Sizes - ¾" female swivel nut tap connection & 22mm Speedfit
• Length - 300mm
• Accreditations - BSI to BS EN ISO9001, WRAS and BBA approved
• Brand - John Guest Speedfit

Application in cold water (indirect and direct mains):

• Usual working temperatures - 20°C
• Max working temperature - 20°C
• Max working pressure - 12Bar

Application in hot water (including unvented cylinders):

• Usual working temperatures - 65°C
• Max working temperature - 95°C
• Max working pressure - 6Bar

Please note - Not for use in central heating, gas, fuel oil or compressed air applications