Underfloor Heating Touchscreen Thermostat 240V

A state-of-the-art solution to use in every underfloor heating system - The control is an essential part of any heating system as it creates your environment in the most efficient and cost effective way possible.

Features:

• Weekly circulation digital programming thermostat with LCD touch screen, which has 6 event everyday.
• Manual mode and programme mode can be selected.
• The thermostat is recommended for control of electric heating devices or on/off valve actuator used in hydronic floor heating.
• Ensures that your system only operates when required and for the minimum period of time - There are various methods of doing this but all are managed by your control system with various levels of integration between the heating zone, heat source and outside temperature.
• Room temperature control for Underfloor heating is measured by ambient room temperature controllers that are located in each zone - These are linked to the local manifold wiring centre.
• You can use the top and bottom buttons on the left-hand side of the stat to change the room temperature up and down.
• The top right button is where you program in your time periods and the bottom right button is where you turn it off.
• Designed to be flush mounted so it must be fitted to a single gang back box which will be installed during first fix.
• The stat is a 230V mains stat and as such requires a 3-core insulated cable to be installed connecting the stat to the wiring centre.

Technical data:

• Housing material - Anti-Flammable PC
• Colour - White
• Voltage - 220V/230V
• Power consumption - 2W
• Setting range - 5°C to 90°C (can adjust to 35°C to 90°C)
• Limitation setting - 5°C to 60°C (factory setting: 35°C)
• Switch differential - 0.5°C to 10°C adjustable factory setting 1°C
• Ambient temperature - -5°C to 50°C
• Protective housing - IP20