HIPPO PRO1® ECO PAC Sausage Power Bond Adhesive 400ml

Using the very latest next generation technology PRO1® Power Bond will deliver a level of immediate grab strength that is typically double that of most products on the market and everything is in one incredible tube for finishing off every job imaginable and generates 96% less waste volume.

Features:

• Each year millions of waste plastic sealant and adhesive cartridges are sent to landfill. Hippo ECO-PACs are new aluminium foil sausages that replace traditional single use plastic cartridges. These strong durable packs are easy to use with no mess and contain less than 1% plastic - They’re much better for the environment because they generate 96% less waste volume.
• As well as the environmental benefits, you also benefit financially - All 400ml ECO-PACs are priced to match their smaller plastic cartridge equivalent products; which means that you get up to 38% more for the same cost.
• Certified For Use In Green Projects - Tested and certified by GEV.PRO1® achieved the best possible rating for low VO emissions. This makes it suitable for architectural specification and use in green building projects.
• Eliminates the need for costly temporary supports and can be used to replace nuts and bolts.
• High Level Vibration Resistance - Can be used to fix items in environments that are prone to vibrations. PRO1® also continues to work when exposed to UV light.
• Ultimate Instant Grab - PRO1® is the ultimate grab adhesive. It’s sp powerful that unlike most grab adhesives it can even be used to replace mechanical fixings.
• Work in soaking wet environments with the knowledge that PRO1® will continue to do it’s job - Leave it fully immersed in water and it will still cure.
• Virtually odourless, none hazardous and completely solvent and isocyanate free - Tested and A+ for low VOC emissions.
• Bond virtually anything to anything including natural stone and delicate synthetics.
• Incredible levels of adhesion with a wider range of materials than basic adhesives.
• Ideal for use in areas where the adhesive or sealant needs to work unnoticed.
• When dry you can paint over PRO1® with most common paints.
• Does not cause any corrosion in metal joints.
• Can be used in salt-water environments.
• Suitable for interior and exterior use.
• Can fill gaps and uneven surfaces.

Technical data:

• Medium type - Paste (ready to use)
• Colour - White
• Curing system - By means of humidity
• Components - 1
• Skin formation (At 23°C and 50% RH) - 15min
• Curing (At 23°C and 50% RH) - 2,5-3mm/24hr
• Density - 1.64g/ml
• Processing temp - 5°C to 40°C
• Shore a hardness (ISO 868 - 3 seconds) -60
• Modulus (100% elongation - ISO 8339) - 1.70N/mm²
• Elongation at break (ISO 8339) - 160%
• Shearing strength - Initial: 25g/cm², After 4 hours: 8kg/cm², After 1 week: 29kg/cm²
• Tensile strength - Initial: 600g/cm², After 4 hours: 11kg/cm², After 1 week: 24kg/cm²
• Solvent and isocyanate content - 0%
• Service temp. - -40°C to +90°C
• Chemical resistance - Excellent
• UV Resistance - Excellent
• Paint compatibility - Water based: Yes, Solvent based - Yes (Test compatibility)
• Storage - Store in original unopened containers between 5°C and 25°C. Avoid frost. Shelf life 12-18 months
• Size - 400ml
• Brand - HIPPO

Please note - Hippo Combi Sealant Gun is sold seperatley.