Fernox Magnetic Scale Reducer Compression 15mm

Suited to single appliance protection and is most notably used to protect the boiler against the damaging effects of scale. It is easily connected onto 15mm pipework and requires no further maintenance, while the positive effects continue for up to 10 years, dependent on water usage levels.

Features:

• An in-line scale reducer to prevent the build-up of scale using magnetic principles.
• Installed into the pipework using compression fittings.
• In an average domestic household, the Fernox Magnetic Scale Reducer provides single appliance protection.
• Effective immediately and is guaranteed for 12 months against manufacturing defects.
• Pressure rated to 10 bar at 20°C with an operating temperature of 2°C to 40°C (cold feed) and is designed for 15mm pipework.
• Single appliance protection.
• Lasts for up to 10 years.
• No need for an earth bond strap.

Technical data:

• Brand - Fernox
• Product Type - Magnetic Scale Reducer
• Material - Brass
• Finish - Nickel Plated
• Height - 40mm
• Width - 185mm
• Connection Type - Compression
• Diameter - 15mm

Standards & Certifications:

• WRAS approved product.
• Helps to achieve Part L of the Building Regulations (England and Wales) that states that in hard water areas which exceed 200ppm, provision should be made to treat feed water to water heaters and hot water circuits of combination boilers to reduce the rate of limescale formation as well as limiting its harmful effects on energy efficiency.

Please Note:

• Select a straight pipe run that is long enough to position the unit, and ideally install no further than one metre before the appliance needing protection.
• The Fernox Magnetic Scale Reducer is designed for single appliance protection only.
• If protecting a boiler, install no further than one metre away.