MAPEI waterproofing kit is for tanking walls & floors in  wet rooms, shower rooms, bathrooms and wet areas.

Feature:

• Substrates must be solid, clean, dry and free of oil, grease, old paintwork or any other material which could affect the bond. When it is applied on existing ceramic coatings, accurately check if the substrate is sound, and clean all the mould, loose material, etc.
• Cementitious substrates must be stable and dry, and not subject to rising damp.
• Alkali-resistant rubber tape with textile backing/edges. For use with cementitious waterproofing systems and liquid membranes. For the flexible waterproofing of angles / junctions expansion joints to be treated with MAPEGUM WPS.
• Please note the tape and corners may vary in colour.

Technical data:

• Brand - Mapei
• Product Type - Shower Waterproofing Kit
• Weight - 10kg
• Kit Consist of: 1 x Shower Waterproofing Kit Primer 0.5kg. 1 x Mapegum WPS 5 kg drums. 1 x Shower Waterproofing Tape 10m roll.

Please note: No reinforcement required. Do not apply Mapegum WPS if the temperature is lower than +5°C.  Do not apply Mapegum WPS on damp cementitious substrates or on substrates which are subject to rising damp. Do not use Mapegum WPS on surfaces continuously immersed in liquid such as swimming pools, fountains, storage tanks, etc. Do not use Mapegum WPS to cover cracks. Mapegum WPS must be protected from abrasion caused by pedestrian traffic by installing ceramic tiles or stone material. Do not use over painted surfaces.