Makita HR4013C AVT SDS-Max Rotary Hammer Drill 40mm 110V

Features:

• Developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration.
• One touch sliding chuck for easy bit installation and removal.
• Easy to operate operation-mode change lever - Located on the top of the motor housing for reduced possibility of breakage.
• "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body.
• LED service light indicates when to replace carbon brush.
• In hammering mode, on/off switch is switchable between two switches to meet your application. For Continuous or Intermittent chiselling applications.
• AVT - The Anti Vibration Technology system has an active dynamic vibration absorber which ensures operation with extremely low vibration.
• The damper spring behind the drill bit absorbs reaction force caused by the drill bit at the moment of impact.
• The damper springs in the handle separate he handle from the machine body, further reducing the vibration.
• Designed with flat sided body for ease of handling.
• Double insulation.

Technical data:

• Voltage - 110V
• Input wattage - 1000W
• Net weight - 6.8-6.9kg
• Impact energy - 8.0 Joules
• Max. capacity: Concrete - 40mm
• Impacts per minute - 1450-2900ipm
• No load speed - 250-500rpm
• Vibration K factor - 1.5m/sec²
• Vibration: Chiselling - 4.5m/sec²
• Vibration: Hammer drilling - 5m/sec²
• Warranty - 3 Years
• Wattage - 1000W
• Brand - Makita

Supplied with:

• Side handle
• Depth stop
• Bit grease
• Carry case