Fermacell Perimeter Strips 10x50mm x 60mtr

fermacell® perimeter strip is used for isolation between fermacell® Flooring Elements and adjacent structural elements.

Features:

• Non-flammability A1
• Non-flammable ROCKWOOL with a melting point of greater than 1000°C
• High compression strength
• High density ROCKWOOL
• High heat and sound insulation.
• Low heat conductance and low dynamic stiffness.
• Recyclable.
• ROCKWOOL can be processed and put back into the production cycle as a raw material.

Technical data:

• Thickness - 10mm
• Width - 50mm
• Length - 60mtr
• Construction material - Class A1
• Melting point - >1000°C
• Material - Class A1
• Brand - Fermacell

Application:

• Determine the finished height of the fermacell® Dry Flooring Elements and mark this off on the surrounding walls.
• Place the Perimeter Strip on the wall or fix it to the wall using adhesive.
• The upper edge of the Perimeter Strip should be at least 5mm above the finished height of the flooring elements.
• Excess material should only be cut off after laying the floor covering, e.g. tubes.
• If necessary, the height of the Perimeter Strip can be varied by applying two strips, one on top of the other.