Features:

• Excellent adhesion and initial grab.
• Can be used in all weather conditions.
• Wide service temperature range of -40°C to +100°C.
• A high performance, single component, moisture curing, Silyl Modified Polymer (SMP) based adhesive.
• Will bond most surfaces even if both are impervious and can be applied to damp or wet surfaces.
• Low odour and cures to form a hard elastic rubber, with almost no shrinkage and no hazard; it does not contain any water or solvent, making it ideal for bonding foam polystyrene sheets.
• Bonds to most surfaces including wood, concrete, brick, plaster, glass, ceramics, metals, rigid PVC, grp insulation boards and foam polystyrene.

Technical data:

• Colour - Warm white
• Form - Thixotropic paste
• Specific gravity - 1.5 approx.
• Composition - Moisture curing SMP Polymer system
• Service temperature - -40°C - +100°C
• Coverage (approx.) - 44mtr of 3mm diameter bead per cartridge, 14mtr of 5mm diameter bead per cartridge
• Drying times - Touch dry: 30-40min, Cure time: 24hr (depending on bead size and substrates being bonded)
• Shore A hardness - 50-55
• Tensile strength - 1.5-1.8MPa
• Resistances - Water: Excellent, Oil & Petrol: Good, Chemicals: Good, Abrasion: Good
• Solvent For cleaning up - When wet: White spirit, When dry: Mechanical removal e.g. cut, scrape, sand
• Size - 290ml
• Brand - Bostik