ClassicBond Pressure Sensitive Cured Cover Strip 1.52x152mm (Sold Per Metre)

Integrate the Pressure-Sensitive Cured Cover Strip seamlessly into your ClassicBond and ClassicBond Pro membrane installations. Simplify your next ClassicBond EPDM project with this nominal 1.52mm thick, fully cured EPDM membrane featuring a 0.76mm thick synthetic rubber pressure-sensitive adhesive.

Features:

• The versatile PS Cured Cover Strip is ideal for stripping in seams and metal edgings, splicing with various roof systems (PVC/TPO/GRP/Metal Systems), sealing end laps in FleeceBack systems, or making repairs to cut membranes.
• Ensure optimal performance by using PS Cured Cover Strip in conjunction with ClassicBond EPDM Primer.
• Demonstrates resilience equivalent to the field membrane.
• Its fully cured state allows it to withstand expansion and contraction loads without compromising strength.
• Exhibits resistance against tearing, flex cracking, and abrasion induced by temperature extremes, sunlight, precipitation, and typical weathering conditions.

Technical data:

• Brand - ClassicBond
• Product Type - Pressure Sensitive Cured Cover Strip
• Colour - Black
• Thickness - 1.52mm
• Nominal Thickness - 2.29mm
• Width - 152mm
• Nominal Width - 150mm Membrane / 155mm Adhesive
• Length - Sold Per Metre
• Tensile Strength - 1650psi (11.3Mpa) Min.
• Elongation - 480% Min.
• Brittleness Temperature - -55°C

Please Note:

• Avoid prolonged skin contact; wash affected areas with soap and water if contact occurs.
• Storage temperatures exceeding 32ºC may impact product shelf life.
• Store the cover strip in a dry area.
• Storage or use below 4ºC can result in adhesive tack loss; maintain a minimum temperature of 15ºC during overnight storage.
• Thoroughly clean surfaces before applying primer and tape for sealing to aged roof systems.
• Condensation may form on applied primer in near-dew point conditions; discontinue application until the surface is dry.
• PS Cured Cover Strip is not suitable for flashing corners or pipes due to its cured nature.
• Prevent contact with waste products or direct steam venting.
• Keep the product out of the reach of children.