Bostik Cementone Concentrated Mortar Plasticiser 1L

Bostik Cementone Concentrated Mortar Plasticiser 1L is a high-performance additive designed to enhance the workability of mortar while eliminating the need for lime. This plasticiser improves plasticity, reduces grittiness, and creates a smooth, easy-to-work mix. By lowering water content, it increases the durability and strength of the mortar while offering resistance to frost.

Specially formulated with a concentrated blend of modified lignin-based surface-active agents, Bostik Mortar Plasticiser is free from chlorides, making it suitable for a range of masonry applications, including bricklaying, blockwork, and rendering.

Features:

• Improves workability and plasticity of mortar
• Reduces water usage, enhancing strength and durability
• Enhances bond strength and adhesion
• Reduces shrinkage and cracking
• Suitable for use in all weather conditions
• Cost-effective and easy to use

Technical Data:

• Brand - Bostik
• Range - Cementone
• Product Type - Mortar Plasticiser
• Volume - 1ltr
• Application Temperature - +5°C to +25°C
• Coverage - A 1L bottle is sufficient to plasticise 85 – 125 mixes, based on 25kg of cement per mix
• Cleaning - Clean tools and equipment with water immediately after use

Application :

1. Ensure that all components of the mix are above 5°C.
2. Sands and aggregate should be dry for best results.
3. Shake the bottle before use, then remove the cap on the cup at the top of the bottle.
4. Squeeze the bottle until the liquid in the cup rises to the correct level. For most applications, 8 – 12ml per 25kg of cement is recommended. Do not overdose.
5. Add the measured liquid to the gauging water at the appropriate dosage and stir well to ensure even dispersal.
6. Mix this solution with the sand and cement to achieve the required mortar consistency.
7. When using Bostik Concentrated Mortar Plasticiser, less water is typically required.
8. Replace the cap on the cup after use.

Dilution Ratio:

• Mix 10 - 20ml of Bostik Mortar Plasticiser per 25kg of cement, combining it with gauging water before adding to the dry mix.

Standards & Certifications:

• Complies with BS EN 934-3:2009