A cement-based, tile grouting compound for joint widths of 5mm up to 25mm around most types of porcelain floor tiles. It mixes to a fine textured, highly-flowable grouting slurry, which can be applied using a rubber squeegee.

Features:

• EasyGrout mixes readily with water to give a highly flowable joint filling, and grouting mortar.
• It is ideal for use on interior and exterior tiled floor surfaces with high early strength, resilient, compact grout joint is needed, particularly in areas subject to early and sustained trafficking.
• It is not suitable for use on vertical surfaces.
• It is designed specifically for ceramic and porcelain tiles and is not recommended for use on natural stone.
• Natural stone and porous materials are particularly at risk from permanent discolouration.
• Suitable for joints from 5mm to 25mm wide with a minimum depth of 20mm. (Maximum joint dimensions should not exceed 25mm x 25mm)
• EasyGrout has a workable open time of up to 1 hour (depending on weather conditions) and can be walked on within 3 hours.
• It cures quite rapidly to give a high early strength, shrinkage compensated durable mortar.
• Always add the powder to the water. Pour the content of one 5kg bag of powder to 900ml of clean, cold water.

Technical data:

• Brand - Azpects
• Range - EasyGrout
• Product Type - High Quality Slurry Grout
• Size - 15kg
• Colour - Argent
• Dose - 5kg / 900ml of Water

Please Note:

• It is important not to apply if the surface temperature is likely to exceed 35°C or fall below 5°C at any time during the first 24 hours after application.
• Do not allow the product to dry on the tile surface.