per page

Showing 1 Products

per page

Showing 1 Products

Electrical Switches and Sockets from MP Moran

Sockets and switches are pivotal in defining the functionality and aesthetic appeal of any residential or commercial space. Part of our wider switches, sockets and back boxes range, our selection is designed to cover every project type — from a straightforward single-room refurbishment to a large-scale commercial fit-out. At MP Moran, we pride ourselves on offering an extensive selection of switches and sockets that cater to a wide array of design preferences and functional requirements. Our range is meticulously curated to ensure safety, reliability, and style, seamlessly integrating into various interior designs while catering to the evolving needs of modern electrical installations.

Our Switches and Sockets Range

We stock a comprehensive range of switches and sockets covering every finish, configuration, and application — from standard 13A outlets to smart controls and weatherproof outdoor sockets for exposed locations. Each product is paired with compatible back boxes for switches and sockets, so you can source everything for a complete installation in one place. Our product lineup is designed to meet the specific needs of any project, offering both variety and quality:

Choosing the Right Switches and Sockets for Your Installation

Selecting the correct specification starts with three variables: how many outlets are needed at each point, what load they will serve, and what environment they will operate in. For standard power circuits, a switched 13A double gang socket covers the majority of domestic and commercial requirements — it reduces the number of back boxes needed compared with two single gang sockets side by side, and is the default specification on most new-build and renovation projects. Where only one outlet is needed or wall space is restricted, a single gang socket remains practical and cost-effective. For dedicated circuits such as cookers, boilers, or shower isolators, a 20A or 45A double-pole switch is the correct specification rather than a standard 13A faceplate. If device charging is a priority in kitchens, bedrooms, or offices, USB socket outlets with integrated USB-A and USB-C ports are increasingly specified to keep mains outlets free. For lighting circuits, dimmer switches are available in push and rotary formats compatible with LED, CFL, and halogen loads — always check the minimum load rating before specifying on an all-LED circuit. In environments where aesthetics matter - premium residential properties, hotels, offices, and showrooms - screwless sockets and switches provide a clean finish with no visible fixings. For outdoor locations subject to moisture, IP44 covers splash-proof applications, while IP66 is the correct specification for direct rain exposure. All products we stock conform to current 18th Edition wiring regulations and, for standard outlets, BS 1363. Ensure you also have the right electrical cables for wiring and circuit protection and consumer units in place before installation – both available in our full Electrical & Lighting range. If you are specifying across a full floor or building, co-ordinating products from a single brand family - such as MK Electric, BG Electrical, or Hager - simplifies procurement and delivers a consistent installation throughout.

Why Choose MP Moran for Switches and Sockets?

Choosing MP Moran for your switches and sockets ensures:

  • Aesthetic Versatility: With a variety of styles and finishes, our products can enhance the look of any space, aligning with your design vision.
  • Safety and Reliability: Engineered to high standards, our switches and sockets guarantee a safe and reliable electrical system.
  • Functional Diversity: From charging devices via USB to controlling lights remotely, our range includes features that add convenience and efficiency.
  • Durability: Our switches and sockets, constructed from quality materials, ensure longevity and performance.

Incorporating MP Moran's switches and sockets into your project not only enhances the aesthetic appeal of your interiors but also ensures the safety, functionality, and durability of your electrical installations.

Switches and Sockets: Trade Supply and Expert Support Since 1974

MP Moran has been supplying the trade since 1974, and our range is specified daily by electricians, contractors, and building companies across London and Hertfordshire. Our six branches — Watford, Enfield, Walthamstow, Bethnal Green, Camberwell, and Barnet — mean there is always a local counter within reach when a job needs materials the same day. Trade account holders benefit from account pricing, consolidated monthly invoicing, and purchase order facilities, making us a practical partner for contractors managing multiple sites. Our branch staff carry genuine product knowledge: they can confirm back box depth compatibility, cross-reference dimmer load ratings, and advise on 18th Edition compliance for your specific installation.

Buy Switches & Sockets at MP Moran Branches Across London and Hertfordshire

Shop online, or pay us a visit at one of our MP Moran branches across London and Hertfordshire to discover our comprehensive range of switches and sockets. Our experienced staff are available to offer expert advice and support, helping you select the ideal solutions for your project. Experience our commitment to quality and customer service firsthand, and let us assist you in achieving a professional and stylish electrical installation.

Switches and Sockets FAQs

How many sockets do I need in each room?

+

There is no legal minimum for the number of sockets in a room, but the 17th Edition wiring guidance and most electricians work to practical standards based on how a room is used. A bedroom typically benefits from a minimum of four double sockets, a living room from six, and a kitchen from eight or more given the number of appliances in regular use. Home offices increasingly need eight to ten outlets to accommodate computers, monitors, printers, and charging equipment without relying on extension leads. The general principle is that extension leads are a workaround, not a solution, and a properly specified first-fix installation should eliminate the need for them entirely. It costs relatively little to add extra sockets at first fix when the walls are open, but retrofitting them later involves plastering, decorating, and potentially significant disruption. Always plan socket positions around furniture layouts and appliance locations before the electrician starts work.

What is a 5A round pin socket used for?

+

A 5A round pin socket is an older British standard outlet that operates on the lighting circuit rather than the ring main, meaning it is switched off when the room lights go off. It is most commonly used for floor lamps and table lamps, allowing them to be controlled centrally via the room light switch rather than requiring a separate plug-in switch on each lamp. You will find them in older properties, hotels, and period-style refurbishments where central lamp control is part of the room design. They look noticeably different from standard 13A square pin sockets and only accept round pin plugs, so standard appliance plugs cannot be inserted by mistake. They are still a legitimate and compliant installation option under current wiring regulations provided the circuit is correctly rated. If you are renovating a property and want to retain this feature, your electrician can wire new round pin sockets into the existing or new lighting circuit.

What is a fan isolator switch and where is it used?

+

A fan isolator switch is a dedicated three-pole switch designed specifically to isolate an extractor fan from its electrical supply, allowing safe maintenance or replacement without switching off the whole circuit at the consumer unit. It is a requirement under BS 7671 wiring regulations that every fixed appliance has a means of local isolation, and for extractor fans a dedicated isolator switch satisfies this requirement neatly. They are most commonly installed in bathrooms, kitchens, and utility rooms where extractor fans are a standard fitting. Unlike a standard on-off switch, a fan isolator disconnects all three poles of the supply simultaneously, which is the correct method for isolating a motor-driven appliance. They are typically surface or flush mounted close to the fan, outside the bathroom zone where applicable, and are available in the same finishes as standard switches. Always check that the isolator you select is rated for the current draw of the fan being installed.

What is a 20A double pole switch used for in a kitchen?

+

A 20A double pole switch is used to provide a local means of isolation for fixed kitchen appliances such as dishwashers, washing machines, tumble dryers, and electric hobs that are wired directly into a dedicated circuit rather than plugged into a socket. Double pole means the switch breaks both the live and neutral conductors simultaneously, fully isolating the appliance from the supply rather than just interrupting the live wire. This is the correct and safe method of isolation for appliances that may retain voltage in the neutral conductor when only the live is switched. The 20A rating makes it suitable for most under-counter kitchen appliances, though higher current appliances such as electric cookers and ovens require a 45A cooker switch or control unit instead. Kitchen double pole switches are available in standard white plastic and a range of metal finishes to match surrounding sockets and switches. They should always be positioned within easy reach of the appliance they control and clearly labelled where multiple switches are fitted side by side.

What is a double pole switch and when do I need one?

+

A double pole switch breaks both the live and neutral conductors at the same time, fully isolating whatever it controls from the electrical supply. A standard single pole switch only interrupts the live conductor, which is sufficient for most lighting and socket circuits but does not provide complete isolation for appliances where residual voltage in the neutral could pose a risk during maintenance. Double pole switching is required or strongly recommended for fixed appliances including boilers, immersion heaters, electric showers, extractor fans, and under-counter kitchen appliances. In bathroom and shower room installations, all switching must be double pole as an additional safety measure given the presence of water. The physical appearance of a double pole switch is identical to a single pole switch on the faceplate, so the distinction is entirely internal. If you are specifying a new installation or replacing an existing switch on a fixed appliance, always confirm with your electrician whether double pole isolation is required for that circuit.

What is a data socket and do I still need one?

+

A data socket, also referred to as an RJ45 or Cat6 network socket, provides a hardwired ethernet connection point in a wall outlet, allowing devices to connect directly to your router or network switch via a cable rather than relying on Wi-Fi. Despite the widespread adoption of wireless networking, wired ethernet connections remain significantly faster, more stable, and more secure than Wi-Fi for devices that stay in a fixed position, such as desktop computers, smart TVs, network-attached storage, and gaming consoles. For home offices, media rooms, and any location where connection reliability matters, a wall-mounted data socket is still a worthwhile installation. Cat6 cabling is the current standard for new installations and supports speeds up to 1Gbps across typical home network distances with headroom for future upgrades. Data sockets can be fitted in the same backbox and faceplate format as standard electrical sockets and are available in matching finishes across most switch ranges. Running data cabling at first fix, when walls are open, costs very little compared to the disruption of chasing cables in later.

What is an intermediate switch and where is it needed?

+

An intermediate switch is used in circuits where a light or group of lights needs to be controlled from three or more switch positions, such as a long hallway with switches at each end and one in the middle, or a large open-plan room with multiple access points. In a three-switch arrangement, two-way switches are fitted at the start and end of the circuit, and the intermediate switch is wired in between them to complete the control chain. Electrically, an intermediate switch has four terminals rather than the three you find on a two-way switch, which allows it to redirect the circuit path as part of the switching sequence. On the outside, intermediate switches look identical to standard switches, so the distinction only becomes apparent when you look at the wiring terminals or the product data sheet. They are available in all standard finishes and gang configurations to match the rest of the installation. If you are planning a lighting scheme with more than two control points, confirm with your electrician at design stage that intermediate switches are included in the specification.

Can I get sockets with built-in surge protection?

+

Yes, surge-protected sockets are available and incorporate a metal oxide varistor (MOV) or similar component behind the faceplate that absorbs and diverts voltage spikes before they reach connected equipment. They look identical to standard sockets from the outside and fit a standard backbox, making them straightforward to specify as a direct replacement. They are particularly useful in home offices, server rooms, and entertainment setups where expensive electronics are permanently connected and vulnerable to damage from power surges caused by nearby lightning strikes, grid switching events, or large appliances cycling on and off. The level of protection is rated in joules, with higher joule ratings indicating greater capacity to absorb surge energy before the protection component is exhausted. It is worth noting that individual socket-level surge protection works alongside, rather than instead of, whole-house surge protection fitted at the consumer unit, which is becoming more common in new installations. If protecting high-value equipment is a priority, ask your electrician about combining both approaches for the most comprehensive solution.

What is a blank plate and when would I use one?

+

A blank plate is a faceplate with no switches, sockets, or apertures that is used to cover an unused or redundant backbox in a wall. They are commonly needed when a socket or switch position is no longer required following a renovation or refit, and rather than filling the backbox with plaster and redecorating, a blank plate provides a clean, finished cover that can be removed again if the position is ever needed in future. They are also used during phased installations where a backbox is installed at first fix but the final fitting is not yet decided. Blank plates are available in every standard finish and gang size to match the rest of the switch and socket installation, so they sit neatly alongside live outlets without looking like an afterthought. Some electricians also use them temporarily while waiting for a specific product to arrive on site. They are one of the simplest and most overlooked components in an electrical accessories schedule, but specifying the correct finish at the outset avoids a mismatched plate standing out on an otherwise consistent wall.

How do I choose the right backbox depth for my installation?

+

Backbox depth is determined by the wall construction, the type of fitting being installed, and the amount of cabling that needs to be accommodated behind the faceplate. Standard single gang backboxes are available in 25mm and 35mm depths, with 25mm being sufficient for most single sockets and simple switch circuits, and 35mm providing more room where multiple cables are looping in and out or where USB modules with additional internal components are being fitted. Double gang backboxes typically come in 25mm, 35mm, and 47mm depths, with deeper boxes needed for grid switch systems, dual-USB sockets, or any fitting with bulkier internal components. For solid brick and block walls, a metal dry-lining backbox is the correct choice and requires chasing or core drilling to recess into the wall. For stud partition and plasterboard walls, a plastic dry-lining box with expanding wings is the standard fitting and requires no additional fixings. Always check the minimum backbox depth specified on the fitting's data sheet before ordering, as some products will not fit in a shallow box regardless of how neatly the cables are folded. Browse our full range of back boxes to find the right depth and type for your installation.

Read more